1640-062D
Model: DTFL402D
The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).
Attributes
| Model # | DTFL402D |
| Bore, mm. | 40 |
| Cushion Length | 1.34 in. / 34mm |
| Fx lbs. @ 87 PSI/ 6 bar | 152 lbf. / 680 N |
| Fy lbs. | Fz lbs. | 539 | 539 |
| Mx in. lbs. | 4959 |
| My in. lbs. | 3720 |
| Mz in. lbs. | 3720 |
| Port Loc. | Port Type | Side Rear | Single End, RH, BSPP |
| Weight | 11.25 lb. |
| Weight Stroke/ in. | .42 lb. |
