Model: DTFL182C

The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).


Model # DTFL182C
Bore, mm. 18
Cushion Length .59 in. / 15mm
Fx lbs. @ 87 PSI/ 6 bar 31 lbf. / 138 N
Fy lbs. | Fz lbs. 123 | 123
Mx in. lbs. 46
My in. lbs. 79
Mz in. lbs. 79
Port Loc. | Port Type Side Rear | Double End, BSPP
Product 1618-062C
Weight 1.98 lb.
Weight Stroke/ in. .11 lb.
No Product Image Available