Model: DTFL252C

The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).


Model # DTFL252C
Bore, mm. 25
Cushion Length .71 in. /18mm
Fx lbs. @ 87 PSI/ 6 bar 60 lbf. / 270 N
Fy lbs. | Fz lbs. 269 | 269
Mx in. lbs. 1417
My in. lbs. 1062
Mz in. lbs. 1062
Port Loc. | Port Type Side Rear | Double End, BSPP
Weight 3.75 lb.
Weight Stroke/ in. .16 lb.
No Product Image Available