1625-063D
Model: DTFL253D
The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).
Attributes
| Bore, mm. | 25 |
| Port Loc. | Port Type | Bottom | Single End, RH, BSPP |
| Fx lbs. @87 PSI / 6 bar | 60 lbf. / 270 N |
| Fy lbs. | Fz lbs. | 269 | 269 |
| Mx in. lbs. | 1417 |
| My in. lbs. | 1062 |
| Mz in. lbs. | 1062 |
| Weight | 3.75 lb. |
| Weight Stroke/ in. | .16 lb. |
| Cushion Length | .71 in. /18mm |
