Model: DTFL402A

The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).


Model # DTFL402A
Bore, mm. 40
Cushion Length 1.34 in. / 34mm
Fx lbs. @ 87 PSI/ 6 bar 152 lbf. / 680 N
Fy lbs. | Fz lbs. 539 | 539
Mx in. lbs. 4959
My in. lbs. 3720
Mz in. lbs. 3720
Port Loc. | Port Type Side Rear | Double End, NPT
Weight 11.25 lb.
Weight Stroke/ in. .42 lb.
No Product Image Available