The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).
|Port Loc. | Port Type||Bottom | Double End, BSPP|
|Fx lbs. @87 PSI / 6 bar||238 lbf. / 1060 N|
|Fy lbs. | Fz lbs.||719 | 719|
|Mx in. lbs.||8856|
|My in. lbs.||6199|
|Mz in. lbs.||6199|
|Cushion Length||1.57 in. / 40mm|