Model: DTFL632A

The DURATRK DTFL and DTKFL models are suitable for very high forces and torques. A precision linear guideway and recirculating ball bearing system is integrated into the DTS and DTK platforms. DTFL guiding cylinders include two re-circular ball bearing block. Guideway is located 180° from seal slot to reduce loading on the piston/yoke. Saves engineering time and money by integrating the guiding mechanism with the main cylinder. The maximum stroke length is limited to 118.11 inches (3000mm).


Model # DTFL632A
Bore, mm. 63
Cushion Length 1.93 in. / 79mm
Fx lbs. @ 87 PSI/ 6 bar 377 lbf. / 1680 N
Fy lbs. | Fz lbs. 944 | 944
Mx in. lbs. 8856
My in. lbs. 6199
Mz in. lbs. 6199
Port Loc. | Port Type Side Rear | Double End, NPT
Weight 29.3 lb.
Weight Stroke/ in. .78 lb.
No Product Image Available